Many people must remember to place the aluminum coil well after purchasing it, because if it is not placed in place, it is easy to cause the aluminum coil to oxidize, thus losing the significance of our purchase of aluminum coil. Therefore, it is necessary to know where the aluminum roll should be placed.
1. Wrap the aluminum roll with plastic film. If conditions permit, it is better to place it in the place with desiccant, so as to absorb the moisture in the air and avoid the oxidation problem;
2.如果铝卷是放在木箱里面的，那么大家要保证木箱的湿度要小于18% ,而且铝卷的温度不能高于45°C ,大家不要记错了；
2. If the aluminum coil is placed in the wooden box, then we should ensure that the humidity of the wooden box is less than 18%, and the temperature of the aluminum coil should not be higher than 45 ° C. don't make mistakes;
3. If it suddenly changes from the low temperature area to the high temperature area during the storage, we should not open the package immediately, because it is easy to oxidize. We should wait until the aluminum coil is applicable before unpacking, so that there will be no oxidation;
4. If there is leakage of rain and snow in the warehouse, aluminum coil should not be placed, which is easy to cause oxidation. This must be remembered.
The aluminum coil can be packaged in whole or in small coils; the aluminum coil is lined with paper core or aluminum core to prevent the aluminum coil from deformation or bending due to extrusion; the aluminum coil shall be sealed with plastic cloth, and the sealing shall be sealed with transparent tape to prevent water vapor from entering into the aluminum coil to cause corrosion and discoloration of the aluminum coil. The outer packaging shall be tightly packed with thick paper shell, and a layer of kraft paper can be added between the plastic cloth and the paper shell to make the packaged aluminum The rolls were placed on wooden brackets and reinforced with steel strips.